1、 Overview
This machine can perform tensile, compression, bending, tearing, 90 ° peel, 180 ° peel, shear, adhesive force, pull-out force, elongation and other tests on rubber, plastic, foam materials, plastics, films, flexible packaging, pipes, textiles, fibers, nanomaterials, polymer materials, composite materials, waterproof materials, synthetic materials, packaging tapes, paper, wires and cables, fiber optic cables, seat belts, safety belts, leather belts, footwear, tapes, polymers, spring steel, stainless steel, castings, copper pipes, non-ferrous metals, automotive parts, alloy materials, and other non-metallic and metallic materials.
2、 Host specifications
High precision force sensor: The force accuracy is within ± 0.5.
Capacity segmentation: four levels throughout the journey: 0.25/0.5/0.75/1%
Power system: stepper motor+stepper driver+ball screw+linear polished rod+synchronous belt drive.
Control system: External control method is adopted to make the control more precise, with a speed control range of 15-500 mm/min. Equipped with fast coarse adjustment and slow fine adjustment functions. Automatically store after testing and can be set to automatically return.
Display method: 8-segment LED digital tube display.
800 mm upper and lower space on the connecting plate (excluding fixtures) (standard specifications)
Large deformation two-point extensometer: resolution 1/100, accuracy ± 0.1mm
Safety devices: overload emergency stop device, up and down travel limit device, automatic breakpoint stop function.
3、 Software Introduction
3000 touch screen series embedded microsystem computers. This series adopts a 32-bit high-speed embedded processor and a highly integrated digital peripheral circuit, which gives the system the advantages of high-speed processing capability and compact size; And using a high-precision 24 bit AD device, it meets the user's requirements for experimental accuracy. This product is a graphics software specifically developed for material physics testing, making it easier for users to conduct testing experiments.
Performance: Force measurement accuracy 200000 yards (7 levels)
（1） Hardware performance characteristics
Adopting embedded instruction processing chips, with fast computing speed;

Using a 24 bit high-precision chip, the measurement accuracy is>4 levels, that is, the resolution is>20000 yards, and the effective accuracy can reach 200000 yards;
Using programmable logic circuit chips to simplify system circuit design and improve reliability.
The display adopts a TFT true color LCD with a 480 × 272 dot matrix, which can display more information and display more realistically,;
Adopting a Windows like graphical interface with full Chinese menus, making operation easier.
Real time test values, save the current peak value,
The test values and curves are tracked and displayed in real-time, making the testing process clearer.
After the test is completed, the curve will automatically scale.
Use software coefficient grading to calibrate (calibrate) sensors. Can effectively correct the linearity of the sensor; The test values can be adjusted by modifying the coefficients.
The 4-fold frequency photoelectric encoder performs bidirectional counting in both forward and reverse directions, improving resolution;
One RS232 serial port can be connected to our company's B1 universal testing software;
1 channel 232 printing parallel port, can be connected to micro printers or needle printers;
Power unit: N kN、 kgf、gf 、lbf；
Stress unit: Pa kPa 、MPa、kgf/cm2、lbf /in2、kN/m2；
Length (area) unit: mm cm、in；
Analog input function: dual channel simulation signal;
Display function: At the end of the experiment, the force during the experiment can be automatically displayed and memorized;
Save output: can record 50 test results.
（2） Software functional characteristics
1. Multiple test types selection
Universal tensile and compressive testing machine controller, suitable for electronic tensile testing machines, universal
Controller of paper compressive strength testing machine, test types: ring pressure, edge pressure, adhesive pressure, flat pressure
Paper burst tester (blasting machine) controller
2. Each type of experiment has its own breaking parameters that can be set separately.
3. You can choose to connect 4 types of motors
DC motor
Servo motor
Stepper motor
AC motor
4. The test speed, rising speed, falling speed, and fast speed can all be independently set.
5. It can connect multiple units of sensors and convert the display units selected by the user.

6. The main interface can display multiple pieces of information.
Force units
Current peak
Sample number
Last result
Test Record Capacity Progress
Test status
Displacement display (excluding universal tension and compression)
7. This system can perform constant speed loading and pressure holding tests. (Different depending on configuration)
4、 Main technical indicators
Load element: optional configuration in the range of 0-5000N
Power resolution: 1/1000 (5-100N), 1/100 (250-1000N), 1/10 (2500-5000N)
Power accuracy: ≤ 0.8%
Speed range: 15-500mm/min (special testing speed can also be customized according to customer needs)
Effective walking space: 800mm (excluding grippers)
Power supply: É 220V 50HZ.
Machine size: approximately 580 x 400 x 1380 mm in length x width x height.
Machine weight: approximately 100kg.

Configuration Checklist