1、 Product Description
The servo controlled material testing machine is suitable for testing the mechanical properties of metal and non-metal materials such as tension, compression, bending, shear, tearing, peeling, puncture, etc. It can also perform automatic control tests of constant speed loading, constant speed deformation, and constant speed displacement, and has the function of low cycle load cycle, deformation cycle, and displacement cycle. Obtain indicators such as elongation, tensile strength, bending modulus, elastic modulus, yield strength, net energy, return energy, total energy, etc
Using PC for data processing and analysis, the experimental results can be automatically saved. After the experiment is completed, the experimental curve can be retrieved, and the experimental process can be reproduced through the curve, or curve comparison and amplification can be performed. Test software on Windows and visit platforms, with strong data and graphics processing capabilities, can instantly print complete test reports and test curves.
2、 Meets standards
GB/T 16491-2008 Electronic Universal Testing Machine
The local operating software covers GB There are a total of 200 various standards such as ISO and ASTM, including ISO34 proposed by the customer ISO 37、ISO 178、ISO 527 。
This machine can perform curve categories:
Load V S. Displacement load V S. Time
Displacement V S. Time stress V S. Strain
Load V S. Two point extension
3、 Technical parameters
1. Load element: 0-100kN;
2. Power resolution: 1/300000;
3. Strength accuracy: ≤ 0.3%;
4. Power amplification factor: 7-stage automatic switching;
5. System accuracy: ≤ 0.5%
6. Displacement resolution: 1/100000;
7. Displacement accuracy: ≤ 1%;
8. Speed range: 0.001-300mm/min (special testing speeds can also be customized according to customer needs);
9. Effective walking space: 900mm (excluding grippers, special walking space can also be customized according to customer needs);
10. Test width: 400mm (special test widths can also be customized according to customer needs);
11. Power supply: 220V;
12. Power: approximately 1.5KW;
13. Machine size: approximately 760 x 580 x 1870mm (length x width x height);
14. Machine weight: approximately 400kg.
4、 Host specifications
1. High precision sensor: 0-100kN. The power accuracy is within ± 0.3%.
2. Capacity segmentation: Seven levels throughout the entire process: × 1, × 2, × 5, × 10, × 20, × 50, × 100;
3. Adopting high-precision 24 bits A/D, with a sampling frequency of 200Hz and a high resolution of 1/300000 throughout the entire process.
4. Power system: skylight sensor+navigation servo motor+navigation servo driver+reducer+ball screw+synchronous belt drive.
5. Control system: The Pulse Command control method is adopted to make the control more precise. The speed control range is 0.001~260mm/min; The Zhonglian board adjustment has the functions of fast coarse adjustment and slow fine adjustment. Automatically return to the origin and store after testing.
6. Data transmission method: USB transmission.
7. Display method: UTM107+Win7/10 test software computer screen display.
8. A concise one speed and precise seven speed linear dual calibration system for the entire process.
9. After the test is completed, it can be automatically saved or manually saved. After the test is completed, it can automatically calculate the maximum force, upper and lower yield strength, hysteresis loop method, stepwise approximation method, non proportional elongation strength, tensile strength, compressive strength, constant elongation strength at any point, constant load extension at any point, elastic modulus, elongation rate, peeling interval large value, small value, average value, net energy, return energy, total energy, bending modulus, breakpoint displacement x% load, breakpoint load X% displacement, and so on. Data backup: Test data can be saved in any hard disk partition.
10. Testing space: The testing width is about 400mm (standard specification); The walking space of the connecting plate is 800mm (excluding fixtures and standard specifications).
11. Full displacement: Using a Panasonic displacement encoder from Japan, it improves accuracy by 4 times and has strong anti-interference ability. Displacement analysis 1/100000;
12. Safety devices: overload emergency stop device, up and down travel limit device, leakage automatic power off system, automatic breakpoint stop function.
13. Manual control method: A manual operation box can be added.

Product Configuration List